作业帮请翻译高手帮忙,谢谢谢谢.Type "SP" spray tip operates with fluid pressure only. Normal operating pressure (tank pressure) is from 20-50 psi. For automatic spray control, the red valve pressure must be set 29 psi higher than the tank press
来源：学生作业帮助网 编辑：作业帮 时间：2024/05/13 16:31:49
请翻译高手帮忙,谢谢谢谢.Type "SP" spray tip operates with fluid pressure only. Normal operating pressure (tank pressure) is from 20-50 psi. For automatic spray control, the red valve pressure must be set 29 psi higher than the tank press
请翻译高手帮忙,谢谢谢谢.
Type "SP" spray tip operates with fluid pressure only. Normal operating pressure (tank pressure) is from 20-50 psi. For automatic spray control, the red valve pressure must be set 29 psi higher than the tank pressure. Spray discs of several orifice sizes are available. Operating pressure and orifice size should be adjusted according to the mold i.d. The correct spray is a full fan without excessive velocity that applies the desired thickness of wash to the desired number of lance passes. The fan spray should be 15 degrees to the mold’s longitudinal axis.
请翻译高手帮忙,谢谢谢谢.Type "SP" spray tip operates with fluid pressure only. Normal operating pressure (tank pressure) is from 20-50 psi. For automatic spray control, the red valve pressure must be set 29 psi higher than the tank press
"SP"型号的喷嘴只有在液体压力下才能工作.普通的控制压力（水箱压力）是20-50磅/平方英寸.对于自动盆射控制法来说,红色阀门上显示的压力应该比水箱压力要高29磅/平方英寸.可以通过调节几个喷嘴直径来控制喷射范围.控制压力和喷嘴直径应该根据模型的编码上的说明来调节.正确的喷射方法应该是用一个大的风扇不用过快的速度对一定数量的长毛型的关口进行冲洗.风扇喷射的角度与模型纵轴的角度是15度.
后面的有点难度,所以后面的翻译的不是很好.
纯手打,希望能帮到你.